- new
- wall art
- garden art & decor
- house numbers & signs
- custom work
- wall hooks
- NZ-made gifts
- last ones
All LisaSarah artwork is designed and made in New Zealand for both indoor and outdoor use.
Each piece is finished by hand, so slight variations may occur — this is part of the character of the work and not considered a fault.
Many pieces include 12mm deep hanging blocks on the back, designed to lift the artwork slightly off the wall for a clean, architectural finish.
You can hang these using:
Always follow manufacturer guidelines and use the correct number of fixings based on the size and weight of your piece.
👉 Important:
Artwork must be hung from the longest block, as this is the load-bearing support.
Rope-mounted pieces are designed to hang directly from a hook using the rope.
Any blocks on the back are not load-bearing — they simply help the artwork sit flat against the wall. These can be lightly secured with Blu Tack or hanging strips if needed.
These signs come with pre-drilled holes (6mm) for installation using screws (not included).
👉 Important:
If using standoff mounts, avoid over-tightening to allow for natural expansion of steel in warmer temperatures.
Most black, white, gold and brushed stainless numbers include mounting attachments (unless the design is very small). Screws are not included.
Option 1 – Mounting system:
Option 2 – Adhesive fixing:
👉 Tip:
Use baking paper to create a template for accurate placement.
Corten numbers are supplied with holes and must be screwed into place.
This is because the natural rusting process can affect adhesive performance over time.
If you prefer no holes, this must be requested at the time of order.
These arrive with a protective adhesive film.
All powdercoated pieces are made from 304 stainless steel with a durable Dulux architectural coating.
To maintain:
This helps remove salt and environmental residue.
Used for coastal environments, this material is highly corrosion-resistant but still requires maintenance.
To care for your piece:
You can use a stainless steel cleaner to maintain shine and reduce marks.
👉 Note:
“Tea staining” may occur over time — this is cosmetic only and does not affect durability.
Corten steel develops a natural protective rusted patina over time.
During early stages:
To manage:
Optional:
LisaSarah is not liable for any loss or damage arising from the use or installation of products, including indirect or consequential loss.